Betafpv Beta95X V2 HD Digital VTX 95mm F4 OSD AIO 16A ESC 4S Whoop FPV Racing Drone PNP BNF w/ Caddx Nebula Nano HD System
ONLY €173,25 for Betafpv Beta95X V2 HD Digital VTX 95mm F4 OSD AIO 16A ESC 4S Whoop FPV Racing Drone PNP BNF w/ Caddx Nebula Nano HD System – TBS Crossfire Receiver
For More Betafpv Offers see – HERE
For All NEW Banggood Toys Hobbies and Robot Coupons see – HERE
The pusher whoop drone with HD digital VTX you have been waiting for!
Especially combined with Insta360 GO, you can achieve all FPV freestyle tricks easily like diving but still keep your footage impossibly smooth.
Featuring the highly popular inverted drone frame, the center of gravity is right in the middle of the drone, pilots can control the drone better in flight.
What’s more, Beta95X V2(HD Digital VTX) equipped with Nebula Nano Kit, perfectly supports the DJI FPV goggles.
BTW, we provide the camera mount for the Customized Naked Camera, so you can replace it if you need it.
Brand Name: Betafpv
Model: Beta95X V2 ( HD digital VTX )
Item Name: 95mm F4 4S FPV Racing Drone
Weight: 113g (without battery)
Flight Time: about 3.5mins ( take example as 4s 450mah lipo)
1. The first joint cinewhoop with Insta360 Go, create a different FPV experience with you. ( This Camera Not Included)
2. Camera and battery are placed on the top platform. The center of gravity is right in the middle of the drone, makes the drone more maneuverable to achieve all FPV freestyle tricks such as diving.
3. Stable camera, clear footage. Using rubber dumpers to further eliminate the shake of the camera, makes the camera more stable on the flight, which ensures pilots can capture all the beautiful moments of flight with stabilized and clear video
4. With 95mm wheelbase, 1106 motors and F405 FC16A BLHeli_32 ESC, Beta95X V2(HD Digital VTX) is powerful enough. Pilots can fly any freestyle tricks such as DIVE.
5. Equipped with the nebula Nano HD System, perfectly supports the DJI HD system. This lightweight kit also provides a stable FPV picture and long transmission distance, greatly bring you a unique flight experience.
6. Customized Gemfan D63 propeller for Beta95X V2, it is more durable than the other propellers, offers pilots a high-efficiency flight experience.
1x Beta95X Whoop Quadcopter(HD Digital VTX) 1x Insta360 GO Camera Mount 1x Naked Camera Mount 1x Case for Naked Camera V2 1x BEC Board 2x D63 3-blades Propellers CW
2x D63 3-blades Propellers CCW
1x Screw Pack 1x TypeC Connector
|Betafpv Beta95X V2 95mm Frame Kit|
Material: Plastic & Carbon Fiber
|Betafpv F4 Flight Controller AIO 16A BL_32 ESC|
CPU: STM32F405 (Overclock to 240MHz)
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: BETAFPVF405 (BEFH)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX
TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX
Buzzer solder pads
Support programable LED like WS2812 etc
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 3-4S lipo
Con. Current: 16A
Burst Current: 19A
Firmware Target: BETAFPV-16A-32bit
Motor Connectors: 1.25mm header pins connector
Weight: 4.4g (7.7g with XT30 cable)
|Betafpv 1106 4500KV Motor|
Motor Mount Holes: M2EQS on Dia 5.0mm
KV (rpm/V): 4500KV
Plug and cables: Micro JST-1.25 3-pin connector
|Gemfan D63 3-Blade Propeller|
Item: D63 3-Blade Propellers
Color: Obsidian Black
Prop Disk Diameter: 63.5mm
Center Thickness: 4.9mm
Shaft Hole: 1.5mm
|Caddx Nebula Nano HD System|
Vista Kit: 30x29x13mm
Operating Frequency: 5.725-5.850GHz
Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm
Min. Latency (end-to-end):720p 60fps: 32ms
Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km
I/O Interface: USB-C,IPEX,3-in-1 Port
Supported Flight Control System: F3,F4,F7
Operating Temperature Range: 32° to 104° F (0℃ ~40℃)
Input Power: 7.4-26.4V
Power output: 25mW/200mW/500mW/700mW
Hardware included:Vista/Nebula nano/Coaxial cable/Antenna
Shutter: Rolling shutter
|HD Camera Mount||HD Camera Mount Degree: 15° (Provide the STL file of 25° camera mount)|
|Air 5.8GHz Digital VTX Antenna|
Weight: 1.1g (1 pc)
Center Frequency: 5.8GHz
Bandwidth: 500 MHz (5.5 – 6.0GHz)
|Recommend Lipo Battery ( NOT Included)|
Recommend 4S 450mAh Lipo Battery XT30 Plug ( NOT Included)
Frequently Bought Together:
ID:1748556 – SKUF98614