[EU stock – CZ] BETAFPV TWIG XL 3Inch 2-4S 12A AIO Flight Controller 1404 3800KV Brushless Motor BNF Toothpick FPV Racing Drone

€82 €210
[EU stock – CZ] BETAFPV TWIG XL 3Inch 2-4S 12A AIO Flight Controller 1404 3800KV Brushless Motor BNF Toothpick FPV Racing Drone
[EU stock – CZ] BETAFPV TWIG XL 3Inch 2-4S 12A AIO Flight Controller 1404 3800KV Brushless Motor BNF Toothpick FPV Racing Drone
€82 €210
days
0
0
hours
0
0
minutes
0
0
seconds
0
0

ONLY €82 for BETAFPV TWIG XL 3Inch 2-4S 12A AIO Flight Controller 1404 3800KV Brushless Motor BNF Toothpick FPV Racing Drone – Frsky FCC

 

For More BETAFPV Offers see – HERE
For All NEW Banggood Toys Hobbies and Robot Coupons see – HERE

 

This coupon is valid only for EUROPE – CZ warehouse! TAX FREE and FAST SHIPPING from Europe! To know more about Banggood Warehouse and Customs TAX you can read HERE

 

Join Our Telegram Channel

 

Description:

    TWIG XL 3” FPV Toothpick Quad-The first joint quad with Racer X FPV, but not the last one. This TWIG XL X version frame is definitely the most popular frame at present. The performance and power to weight ratio of this frame design are out of this world! With the Caddx Ratel Camera, 1404 3800KV Brushless Motor, 12A Toothpick F4 2-4S AIO FC, it supports 450mAh 4S Battery and provides you super-efficient flight experience. What is more, we adopt the injection-molded canopy, protecting your camera well even in a several severe crashing.

Features:

1. Flight Controller : 12A Toothpick F4 2-4S AIO FC – Integrated with a Betaflight MATEKF411RX processor FC, Betaflight OSD and 2-4S 12A ESC, support 4S battery for fast-flying experience. 

2. Camera & VTX : The Caddx Ratel is a great camera choice for both night flight as well as during the day! Equipped with a high quality 1/1.18″ HDR sensor, it provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. Latency is low at only 8ms. A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default. 

3. TWIG Frame : TWIG XL frames are premium 3mm thick, high-grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm.  All the frames are approximately 140mm motor post to motor post and swing up to 3” props. The frames accommodate motor mounting for 4-hole 9×9 or 12×12 motor mounts. 

4. Canopy : Canopy for Camera V3 version – MINI V3 canopy has a holder hole in the front, but not on MINI V2 canopy. It is suitable for all mini cameras which are the 19*19mm or 20*20mm FPV cameras, like Caddx Vista or DJI FPV unit camera, Caddx Turtle V2, RunCam Racer 3. Provided with STL File for the canopy.

Package Included: 

1 x TWIG XL 3” FPV Quad

1 x HQ 3016 3-Blade Props (4pcs)

1 x Set of M2*7 Screws

 

Specification:

 FC&ESC

12A Toothpick F4 2-4S AIO FC

 Motor

 1404 3800KV Brushless Motor

 Props

 Gemfan 3016 3-Blade Props

 Camera

 Caddx Ratel Camera

 VTX

 A01 25-200mW 5.8G VTX

 Frame

 TWIG XL Frame

 Canopy

 Injection Molded Canopy for TWIG

 Battery

450mAh 4S Battery(NOT Included)

Flight Time 3:00-5:00Mins

 

ID: 1736582 – SKUF98070

1736582CZ
Logo