BETAFPV X-Knight 4 160mm F4 AIO 20A ESC 4S 4 Inch Toothpick FPV Racing Drone PNP BNF w/ 25/200mW VTX Caddx Ratel 1200TVL FPV Camera – FUTABA Receiver

$107 $240
BETAFPV X-Knight 4 160mm F4 AIO 20A ESC 4S 4 Inch Toothpick FPV Racing Drone PNP BNF w/ 25/200mW VTX Caddx Ratel 1200TVL FPV Camera – FUTABA Receiver
BETAFPV X-Knight 4 160mm F4 AIO 20A ESC 4S 4 Inch Toothpick FPV Racing Drone PNP BNF w/ 25/200mW VTX Caddx Ratel 1200TVL FPV Camera – FUTABA Receiver
$107 $240

🇺🇸 $107 / 🇪🇺 91€

 

COUPON PRICE: 🇺🇸 $107 / 🇪🇺 91€

BETAFPV X-Knight 4 160mm F4 AIO 20A ESC 4S 4 Inch Toothpick FPV Racing Drone PNP BNF w/ 25/200mW VTX Caddx Ratel 1200TVL FPV Camera – FUTABA Receiver

*PLEASE NOTE for European Union VAT: Goods purchased with our COUPON and delivered to the destination located in the European Union (EU), VAT and duties (if applicable) have been included in their COUPON prices and there is no need to pay additional taxes.

Also for more:

– BETAFPV Offers see – HERE
– Toys Hobbies and Robot Coupons see – HERE
🇪🇺 EU Warehouse Coupons see – HERE
🇺🇸 USA Warehouse Coupons see – HERE

 

Join Our Telegram Channel

 

Brand Name: Betafpv

Model: X-Knight 4

Item Name: 160mm F4 AIO 20A ESC 4S 4 Inch Toothpick FPV Racing Drone

How to Change Frequency & Channel & Power?
Only support frequency and power change through the SmartAudio interface.
Method 1: Use the OSD menu.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -> VTX SA to change the frequency and power.

Method 2: Use the Betaflight GUI command.                                                                                                              We could also use the Betaflight CLI commands to change the frequency and power of the VTX.

Caddx Ratel 1200TVL FPV Camera Image Sensor: 1/1.8″ Inch starlight HDR sensor        Horizontal Resolution: 1200TVL FOV: 180 Degree Min. Latency: 8ms TV System: NTSC & PAL (changeable) Image: 16:9 & 4:3 (changeable) WDR: Super WDR (HDR) Min. Illumination: Starlight  Synchronization: Internal  Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio:  >60dB (AGC OFF) Video Output: CVBS Camera OSD: Separate OSD DNR: 3-DNR Recommend Lipo Battery (NOT Included)

Recommend Use 4S 850mAh 75C Lipo Battery XT60 Plug

 

Specification:

X-Knight 4 100% Frame Kit Material: T700 Carbon Fiber Wheelbase: 160mm Weight:  24.43g, Frame Height: 8mm Top plate thickness: 1.5mm Bottom plate thickness: 1.5mm Arm thickness: 4mm Battery protected plate thickness: 1.5mm
F4 Flight Controller AIO 20A ESC Board

Model: 20A Toothpick AIO FC V3

CPU: STM32F411CEU6 (100MHZ)

Six-Axis: MPU6000 (SPI connection)

Size: 32.5*32.5mm (26.5mm mounting holes)

Firmware version: BETAFPVF411 (BEFH)

OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)

Support programmable LED like WS2812 etc

Built-in current sensor

Weight: 6.63g

Onboard 20A BLheli_S 4in1 ESC

Support BLheli/BLHELI_S suite Pass-through ready Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 Input Voltage: 2-4S Lipo Continuous Current: 20A Peak Current: 25A Firmware: BLHELI_S Motor Connectors: 1.25mm header pins connector

1505 3600KV Brushless MotorWeight: 13.08g  (1 pc) Shaft: φ1.5mm Motor Mount Holes: M2 KV (rpm/V): 3600KV Input Voltage: 3-4S LIPO Cables: 80mm long, 24AWG cables
HQProp 4025 2-Blade Propeller

Material: Poly Carbonates Length: 4 inches, about 101.6mm Color: Clear Gray Mounting hole: 1.5mm

Quantity: 2 CW & 2 CCW Weight: 1.4g/PC

A01 5.8G 25/200mW VTX
Output power: 0mW, 25mW and 200mW (Adjustable)
Supply Voltage: 5V. NOT support connect to the 1S battery directly
Weight: 2.0g
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
Blue LEDRed LEDPower Status
Flash SolidOFF 25mW
Flash Solid Flash Solid 200mW
OFFFlash Solid Pit Mode
How to Change Frequency & Channel & Power?
Only support frequency and power change through the SmartAudio interface.
Method 1: Use the OSD menu.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -> VTX SA to change the frequency and power.

Method 2: Use the Betaflight GUI command.                                                                                                              We could also use the Betaflight CLI commands to change the frequency and power of the VTX.

Caddx Ratel 1200TVL FPV Camera Image Sensor: 1/1.8″ Inch starlight HDR sensor        Horizontal Resolution: 1200TVL FOV: 180 Degree Min. Latency: 8ms TV System: NTSC & PAL (changeable) Image: 16:9 & 4:3 (changeable) WDR: Super WDR (HDR) Min. Illumination: Starlight  Synchronization: Internal  Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio:  >60dB (AGC OFF) Video Output: CVBS Camera OSD: Separate OSD DNR: 3-DNR
Recommend Lipo Battery (NOT Included)

Recommend Use 4S 850mAh 75C Lipo Battery XT60 Plug

 

ID:1751502 – SKUF97581

1751502CN
Logo