GEPRC CineGO HD VISTA DJI 4S 155mm FPV Racing RC Drone PNP/BNF GR1507 Motor 3600KV 3052 Prop – PNP ( Built-in DJI Receiver)

$301 $517
GEPRC CineGO HD VISTA DJI 4S 155mm FPV Racing RC Drone PNP/BNF GR1507 Motor 3600KV 3052 Prop – PNP ( Built-in DJI Receiver)
GEPRC CineGO HD VISTA DJI 4S 155mm FPV Racing RC Drone PNP/BNF GR1507 Motor 3600KV 3052 Prop – PNP ( Built-in DJI Receiver)
$301 $517

🇺🇸 $301 / 🇪🇺 256€

 

COUPON PRICE: 🇺🇸 $301 / 🇪🇺 256€

GEPRC CineGO HD VISTA DJI 4S 155mm FPV Racing RC Drone PNP/BNF GR1507 Motor 3600KV 3052 Prop – PNP ( Built-in DJI Receiver)

*PLEASE NOTE for European Union VAT: Goods purchased with our COUPON and delivered to the destination located in the European Union (EU), VAT and duties (if applicable) have been included in their COUPON prices and there is no need to pay additional taxes.

Also for more:

– GEPRC Offers see – HERE
– Toys Hobbies and Robot Coupons see – HERE
🇪🇺 EU Warehouse Coupons see – HERE
🇺🇸 USA Warehouse Coupons see – HERE

 

Join Our Telegram Channel

 

Summary:

CineGO HD is the latest CineWhoop model of our team. It is equipped with the latest Caddx Vista high-definition image transmission. So far, it is the lightest Cine model. CineGO HD is mainly used for CineWhoop flight. Its ultra-light design is 30% lighter than traditional GoPro 7/8 aircraft. The whole machine is only 247g, and the flight experience is very flexible.

Features:

No Propellers  in view.

With Caddx Vista Digital HD video transmission system, Goggle can record 720P video

Equipped with a 3-inch tpu guard frame, Ensure safety and reliability

Full 3K Carbon Fiber

Flight Control System:STABLE F405 SYSTEM

Two types of power. 6S version uses GR1507 2800KV motor. 4S version uses GR1507 3600Kv motor

Full Soft Mounted FC System: Provides a clean operating environment for gyro.

Exquisite Assembly Process: Eliminate any potential installation problems.

Weight:203g(without battery and GoPro Mounts TPU)

Weight: 247g(Without Battery)
Receiver: PNP(Build-in DJI Receiver) /Frsky R-XSR / Frsky XM+ / TBS Nano RX

Recommend Spare Parts.Click

Frame:

Full 3K Carbon Fiber

Top plate : 2mm

Bottom plate : 3mm

Side plate : 1.5mm

Wheelbase : 155mm

Motors: GR1507 3600KV

Prop: 3052 Prop

Recommended Battery:4S 850mAh (No inclued)

Recommended Camera:GoPro Hero 7/8(No inclued)

Caddx Vista SPECS:

Size: 30.45 x 29 x 13mm

Weight: 19g

Antenna Connector: U.FL

20×20 stack

200mw to 1200mw max output power

Range 4km max

2S to 6S

High quality mode 30-40 ms

Low latency mode 21-28ms

Compatible with DJI HD camera

Compatible with DJI HD goggles

Electronic System(STABLE PRO F4 35A):

STABLE V2 F4 Flight Controller Specs:

Model:STABLE F4 35A

MCU: F405

IMU: MPU6000 gyro/accelerometer (SPI)

OSD: BetaFlight OSD w/ AT7456E chip

Baro:NO

BEC Output: [email protected]

Integrated LC Filter

Firmware target: OmnibusF4SD

Size: 26x26mm board, 20mm mounting holes (M2)

STABLE V2 F4 ESC BL32 2-6S 4in1 Specs:

MCU:STM32F051

Input:2-6s lipo

Constant:35Amps

Burst:45Amps

Dimensions:31*31mm(including the power pads)

Mounting Holes:20*20mm,M2

Supports Dshot1200,Proshot,Oneshot,Multishot

Current meter: Yes

Target: GEPRC-BL32-4IN1

Package Include:

1x CineGO HD CineWhoop Quadcopter 4S

4x 3inch Props(pairs)GEPRC CineGO4x 3inch Props(pairs)

 

ID:1665141 – SKUF00585

1665141CN
Logo