iFlight Chimera7 Pro HD BLITZ F722 F7 6S 7.5 inch Long Range FPV Racing Drone BNF w/ E55A ESC XING2 2809 1250KV Motor DJI FPV Air Unit

$665 $689
iFlight Chimera7 Pro HD BLITZ F722 F7 6S 7.5 inch Long Range FPV Racing Drone BNF w/ E55A ESC XING2 2809 1250KV Motor DJI FPV Air Unit
iFlight Chimera7 Pro HD BLITZ F722 F7 6S 7.5 inch Long Range FPV Racing Drone BNF w/ E55A ESC XING2 2809 1250KV Motor DJI FPV Air Unit
$665 $689

$665 🇺🇸 or €606 🇪🇺

 

COUPON PRICE: $665 🇺🇸 or €606 🇪🇺

iFlight Chimera7 Pro HD BLITZ F722 F7 6S 7.5 inch Long Range FPV Racing Drone BNF w/ E55A ESC XING2 2809 1250KV Motor DJI FPV Air Unit – BNF-TBS

*PLEASE NOTE for European Union VAT: Goods purchased with our COUPON and delivered to the destination located in the European Union (EU), VAT and duties (if applicable) have been included in their COUPON prices and there is no need to pay additional taxes.

Also for more:

– iFlight Offers see – HERE
– Toys Hobbies and Robot Coupons see – HERE
– 🇪🇺 EU Warehouse Coupons see – HERE
– 🇺🇸 US Warehouse Coupons see – HERE

 

Join Our Telegram Channel

 

Description:

Introducing what has been requested for too long already! A super-efficient iFlight 7inch Long-Range bird that can go where you couldn’t go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! A super stiff frame for minimum resonance and XING2 2809 motors for maximum 7inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above. 

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behavior; Setup instructions included). Vertical and horizontal TBS Crossfire antenna mounts are included to cover you and your antenna dead-ends just in case. GoPro universal TPU bottom stand included; fits your original GoPro bracket and our TPU GoPro protectors (additional).

Main Changelog from Chimera7 to Chimera7 Pro:

– SucceX-D F7 V2.2 Stack (F7+50A ESC) upgraded to BLITZ F722 Stack (F7 V1.1 + 55A 4in1 ESC)

– New Lightweight Side Panels Design – Keep Your Rig Clean

– XING 2806.5 upgraded to XING2 2809 1250KV

– 7-inch frame upgraded to 7.5inch

Highlights:

– Battery voltage LED status light (illuminated IF logo on the bottom)

– 360° TPU protection, DJI cam protection and antenna mounts

– GoPro TPU bottom stand (GoPro protector not included)

– Lightweight Side Panels Design – Keep Your Rig Clean

– No props in view (DJI Air unit record in 1080p/60fps)

– XING2 2809 1250KV efficient wide stator motors

– GPS pre-installed for more safety at a distance

– 6mm rigid arm design for more stiffness

– Top- and bottom battery mount option

PRE-TUNED & PRE-SETUP:

– Is this your first BNF or are you just starting through with FPV? This article might probably help: General Guide // iFlight BNF

– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

   To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”

– Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

   Please check our linked article on  “How to disable Angle-Mode, activate Acro-Mode”

– GPS Rescue is OFF by default to prevent unwanted or unexpected drone behavior.

   Please check our linked article on

Specifications:

Brand: iFlight

Item Name: Chimera7 Pro HD FPV Drone

Weight: 695g (without battery and GoPro mount)

Total Dimensions: 258*200mm (body dimension)

Upper(middle) Plate Thickness: 3mm

Bottom to Top Distance: 20-29mm

ESC: BLITZ E55 4-IN-1 2-6S ESC

Camera Plate Thickness: 3mm

Bottom Plate Thickness: 3mm

Top Plate Thickness: 3mm

Geometry:  DC (DeadCat)

HQ 7.5X3.7X3 Propellers

Arm Thickness: 6mm

XING2 2809 1250KV

FC: BLITZ F722

BLITZ F722 Flight Controller

( Separate FC Link)

Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter

Smartaudio / IRC Tramp VTX protocol supported

Firmware target: IFLIGHT_BLITZ_F722

Motor outputs: 4x (SH1.0 connector)

Flash: 32MB (Blackbox flash)

I2C serial: SDA / SLA pads

Dimensions: 36.5*35 mm

Barometer: DPS310

OSD Chip: AT7456E

LED controller: Yes

MCU: STM32 F722

Beeper pad: Yes

Gyro: BMI270

Weight: 7.8g

UARTS: 6

 BLITZ E55 4-IN-1 2-6S 55A ESC

( Separate ESC Link)

Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

Mounting Holes: 30.5*30.5mm/Φ4mm

Target:   IFLIGHT_BLITZ_G2

Supports 2-6S Lipo input

Current sensor: Yes

Constant: 55 Amps 

Current rate: 200

Burst: 65 Amps

Weight: 15.3g

MCU: G071

BEC: No

XING2 2809 1250KV Motor

( Separate Motor Link)

Model: XING2 2809

KV: 1250

Quantity: 1 PC

Prop shaft: CW thread

Recommended input voltage Voltage: 4S-6S (16V-26V)

Configuration: 12N14P

Stator Diameter: 35.33mm

Weight: 60.7g with short wire

Wire length: 18AWG 260mm

Mounting pattern: 19*19mm

Link here to buy

Package Included:

1x Chimera7 Pro HD FPV Drone

4 x HQ 7.5X3.7X3 CW propeller + 4 x  HQ 7.5X3.7X3 CCW (Color may vary)

2 x Albatross LHCP 5.8GHz SMA FPV Antenna

2 x iFlight Lipo Strap 20*250mm (Black)

1 x Pre-built and Tested Chimera7 Pro

1 x DJI FPV Air Unit Module + Camera

 

ID:1940458 – SKUJ21059

1940458CN
Logo