250€ with coupon for MUSTOOL DSO2D15 Dual-Channel + AFG Digital Storage Oscilloscope 150MHz 1GSa/s Signal

250€ 303€
250€ with coupon for MUSTOOL DSO2D15 Dual-Channel + AFG Digital Storage Oscilloscope 150MHz 1GSa/s Signal
250€ with coupon for MUSTOOL DSO2D15 Dual-Channel + AFG Digital Storage Oscilloscope 150MHz 1GSa/s Signal
250€ 303€

SaveSavedRemoved 0
MUSTOOL DSO2D15 Dual-Channel + AFG Digital Storage Oscilloscope 150MHz 1GSa/s Signal Generator Oscilloscope 2 In 1
250€ 303€

ONLY 250€ with COUPON for MUSTOOL DSO2D15 Dual-Channel + AFG Digital Storage Oscilloscope 150MHz 1GSa/s Signal Generator Oscilloscope 2 In 1 – BANGGOOD

*PLEASE NOTE for European Union VAT: Goods purchased with our COUPON and delivered to the destination located in the European Union (EU), VAT and duties (if applicable) have been included in their COUPON prices and there is no need to pay additional taxes.

Also for more:

– MUSTOOL Offers see – HERE
– Tools Coupons see – HERE
– 🇪🇺 EU Warehouse Coupons see – HERE
– 🇺🇸 US Warehouse Coupons see – HERE

 

Join Our Telegram Channel

 

Feature:
1) 2 channels, both are respectively controlled by independent knobes;
2) 150MHZ analog channel bandwidth;
3) 1 GSa/s real-time sample rate;
4) 8M memory depth;
5) Vertical range 2mV/div ~ 10V/div;
6) Built-in 1 CH 5MHz waveform generator;
7) Vertical resolution : 8bit;
8) Trigger: Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Delay, UART, LIN, CAN, SPI, IIC;
9) CAN decode and protocol analysis: RS232/UART、I2C、SPI、CAN、LIN
10) Can save as multiple data formats, such as setting, waveform, referance waveform, CSV, picture;
11) 5 bits digital voltage meter and 6 bits hardware frequency indicator function;
12) 32 kinds of auto measurements with statistics, real-time statistics of maxmum, minimum, standrad deviation and etc.;
13) 2 sets of digital voltmeter;
14) Support threshold testing, free measurements within the screen;
15) Abundant SCPI remote command control;
16) Many external interface: USB Host/Device.
Specifications:
Model: DSO2D15
Channel: 2 CH+1CH
Bandwidth: 10%n>
Sample rate: 1GSa/S
Memory depth: 8M
AFG: 1CH

Parameters

 

ModelDSO2D15DSO2D10DSO2C15DSO2C10
Bandwidth150MHz100MHz150MHz100MHz
Oscilloscope channels2CH2CH2CH2CH
Waveform generator1CH1CH – –
Oscilloscope
Sample rate1GSa/s (single channel) 500MSa/s (two channels)
Acquisition
SamplingSample data
Peak-to-peak valueDisplay high frequency and random burr
AverageAverage waveform, times:  4, 8, 16, 32, 64, 128
High resolutionUp to 12bit
Input
Input couplingDC, AC, GND
Input impedance1MΩ±2% ‖20pF±3pF
Probe attenuation  factor1X, 10X, 100X, 1000X
Voltage classes300V CAT II
Maximum input voltage300VRMS (10X)
Horizontal
Waveform interpolation(sin x)/x
Maximum record lengthSingle channel maximum 8M
Two channels maximum 4M
Horizontal scale range2ns/div~100s/div  1, 2, 5 step by step
Time base modeY-T, X-Y, Roll 
Zero offsets±0.5 div×minimum time base gear
Sample Rate and Delay Time Accuracy±25ppm
Clock drifting≤±5 ppm/year
Increment Time Measurement Accuracysingle, ”acquisition” mode
(Full Bandwidth)±(1 sample interval+100ppm×reading+0.6ns)
>16 times averages
±(1 sample interval+100ppm×reading+0.4ns)
Sample interval=sec/div÷200
Sample Rate and Delay Time Accuracy±50ppm(at any interval greater than 1ms
Vertical
ModelDSO2D15DSO2D10DSO2C15DSO2C10
Bandwidth150MHz100MHz150MHz100MHz
Rising time in BNC position (typical)2.3ns3.5ns2.3ns3.5ns
Vertical resolution8 bits resolution, each channel samples simultaneously
Vertical sensitivity2mV/div to 10V/div
Offsets range2mV/div to 20mV/div, ±100mV; 50mV/div to 200mV/div, ±1V;
500mV/div to 2V/div, ±10V; 5V/div to 10V/div, ±50V
Mathematical operation+, -, ×, ÷, FFT
FFTWindow: Rectangular, Hanning, Hamming, Brackman, Bartlett, flat top window
Bandwidth Limit20MHz
Bass response(-3db)In BNC position ≤ 10Hz
Vertical gain accuracyIn ”normal”  or ”average” acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%;
In ”normal” or ”average” acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4%
DC offsets accuracy±0.1 div±2 mV±1% offsets value
Voltage measurement repeatability, average acquisition modeUnder the same setting and environment, ≥16 waveforms are sampled, △V of any two averages: ±(3%×value+ 0.05 div)
Note: Bandwidth reduced to 6MHz when using a 1X probe
Trigger
Trigger typeEdge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Delay, UART, LIN, CAN, SPI, IIC
Trigger level range ±5 divisions from the center of the screen
Trigger modeAuto, general, single
LevelCH1~CH2±4 divisions from the center of the screen
EXT0~3.3V
Holdoff range8ns~10s
Trigger level accuracyCH1~CH20.2 div×volts/div within ±4 divisions from the center of the screen
EXT±(Set value× 6%+40mV)
Edge triggerSlopeRising edge, falling edge, rising or falling edge
Signal sourceCH1, CH2, EXT
Pulse width triggerPolarityPositive polarity, negative polarity
Condition(When)<, >, !=, =
Signal sourceCH1~CH2,
Pulse width range8ns ~ 10s
Accuracy8ns
Video triggerSignal standardNTSC, PAL
Signal sourceCH1~CH2
SynchronizationScanning line, line number, odd field, even field, all field
Slope triggerSloperise, fall
Condition(When)<, >, !=,  =
Signal sourceCH1 ~ CH2
Time range8ns ~ 10s
Accuracy8ns
Overtime triggerSignal sourceCH1~CH2,
PolarityPositive polarity, negative polarity
Time range8ns ~ 10s
Accuracy8ns
Window triggerSignal sourceCH1~CH2 
Pattern triggerPattern0: low level; 1: high level; X: ignore
Level(signal source)CH1~CH2
Interval triggerSloperise, fall
Condition(When)<, >,  !=,  =
Signal sourceCH1~CH2
Time range8ns ~ 10s
Accuracy8ns
Delay triggerPolarityPositive polarity, negative polarity
Condition(When)<, >, !=, =
Signal sourceCH1~CH2
Time range8ns ~ 10s
Accuracy8ns
UART triggerCondition(When)start, stop, data, odd-even check, reception error
Signal source(RX/TX)CH1~CH2 
Data formatHex (hexadecimal)
Data length1 byte
Data bit width5 bit, 6 bit, 7 bit, 8 bit
Odd-even checknone, odd, even
Free levelhigh, low
Baud rate (optional)110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud rate(user-defined)300bit/s~334000bit/s
LIN triggerCondition(When)Interval field, synchronization field, ID field, synchronization error, identifier, ID and data
Signal sourceCH1~CH2
Data formatHex (hexadecimal)
Baud rate (optional)110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud rate(user-defined)300bit/s~334000bit/s
CAN triggerCondition(When)Start bit, remote frame ID, data frame ID, frame ID, remote frame data, data frame data, wrong frame, all errors, answer error, overload frame
Signal sourceCH1~CH2
Data formatHex (hexadecimal)
Baud rate (optional)10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000
Baud rate(user-defined)5kbit/s~1Mbit/s  
SPI triggerSignal sourceCH1~CH2
Data formatHex (hexadecimal)
Data bit width4, 8, 16, 24, 32
IIC triggerSignal source (SDA/SCL)CH1~CH2
Data formatHex (hexadecimal)        
Data index0~7
Opportunity(condition)Start bit, stop bit, no response, address, data, restart
Measurement
CursorVoltage difference between cursors △V
Time difference between cursors △T
Reciprocal of △T, in Hertz (1/△T)
Auto measurement
frequency, period, mean, peak-to-peak, RMS, minimum, mixmum, rising time, falling time, + width, – width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference, + duty, – duty, period mean, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF
DVMData sourceCH1, CH2
Measurement typeDC effective value
AC effective value
DC
Frequency meterhardware 6 bits frequency meter
Arbitrary waveform generator
Channel1
Sample rate200MSa/s
Vertical resolution12 bits 
Maximum frequency25 MHz 
Standard waveformssin、square, pulse, triangular, sampling wave, index, noise
Arbitrary waveformArb1, Arb2, Arb3, Arb4
SinFrequency range0.1Hz~25MHz
Square/pulseFrequency range0.1Hz~10MHz
Triangular waveFrequency range0.1Hz~1MHz
Sampling waveFrequency range0.1Hz~1MHz
IndexFrequency range0.1Hz~5MHz
Noise  
Arb1Frequency range0.1 Hz to 10 MHz 
Arb2Frequency range0.1 Hz to 10 MHz 
Arb3Frequency range0.1 Hz to 10 MHz 
Arb4Frequency range0.1 Hz to 10 MHz 
Waveform length8KSa
FrequencyAccuracy100 ppm (<10 kHz) 50 ppm (>10 kHz)
Resolution0.1 Hz or 4 bits,take the greater one
AmplitudeOutput range10mV~7Vp-p (high impedance)
5mV~3.5Vp-p (50Ω)
DC offsetsRange±3.5 V, high impedance
±1.75 V, 50 Ω
Resolution100 μV or 3 bits, take the greater one
Accuracy2% (1 kHz)
Output impedance50 Ω
General specifications
DisplayDisplay type7” diagonal TFT liquid crystal
Display resolution800 (horizontal)*480 (vertical)pixels
Display colour16 million colours (24 bits true colour)
Persistence timeminimum, 1 s, 5 s, 10 s, 30S, infinite
Display typedot, vector
Display brightnessadjustable
Grid typeadjustable
Grid brightnessadjustable
InterfaceStandard interfaceUSB Host,USB Device
General specificationsProbe compensator output
Output voltage, typicalabout 2Vpp input ≥1MΩ load
Frequency, typical1kHz
Power supply100-120VACRMS(±10%), 45Hzto 440Hz, CATⅡ
120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ
Power consumption<30W
FuseT, 3.15A, 250V, 5x20mm
Operating temperature0~50 °C (32~122 °F)
Storage temperature-40~+71 °C (-40~159.8 °F)
Humidity≤+104℉(≤+40°C): ≤90% relative humidity
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
AltitudeOperating and nonoperating3, 000m (10, 000 feet)
Mechanical shockRandom vibration0.31 g RMS from 50Hz to 500Hz,
10 minutes on each axis
Nonoperating2.46g RMS from 5Hz to 500Hz,
10 minutes on each axis
Operating50g, 11ms, half-sine wave
MechanicalSize318 x 140 x 150mm (length x width x height)
Weight2900g

 

Coupons Price History

Price History for MUSTOOL DSO2D15 Dual-Channel + AFG Digital Storage Oscilloscope 150MHz 1GSa/s Signal Generator...

 

OLD COUPONS

Here we publish the expired coupons, but you can try them anyway (from the oldest to the newest): BGe4d52a

 

ID:1980780 – SKUJ99268

CBG1980780CN
Logo