COUPON PRICE: 🇺🇸 $58 / 🇪🇺 50€
SPCMaker Bat78 78mm F4 AIO 20A ESC 1103 8000KV 3-4S/ 11000KV 2-3S Whoop FPV Racing Drone PNP BNF w/ RunCam Nano 2 Camera – 11000KV DSMX Pro receiver
*PLEASE NOTE for European Union VAT: Goods purchased with our COUPON and delivered to the destination located in the European Union (EU), VAT and duties (if applicable) have been included in their COUPON prices and there is no need to pay additional taxes.
Also for more:
– SPCMaker Offers see – HERE
– Toys Hobbies and Robot Coupons see – HERE
– 🇪🇺 EU Warehouse Coupons see – HERE
– 🇺🇸 USA Warehouse Coupons see – HERE
Introduction:
Bat78 is different from other whoop design style, product design is still to extend our small whale 78mm.
Material selection Drop resistant PP material injection molding,
the entire product of electro nic equipment are all wrapped in the protection of the shell, in this regard,
both new players and veteran players.
Do not have to worry about violent impact to the product to bring greater maintenance economic losses.
Brand Name: SPCMaker
Model: Bat78
Item Name: 78mm F4 AIO 1103 8000KV 3-4S/ 11000KV 2-3S FPV Drone
Optional KV Version: 8000KV / 11000KV
Wheelbase: 78mm
Weight: 53g ( Not include Receiver, battery)
Package Included:
1x Bat78 FPV Drone
Specification:
F4 Flight Controller AIO 20A ESC 2-4S Board | F411 AIO 2-4S 20A V1.0 Flight Controller Built-in ESC CPU: STM32F411CEU6(100MHZ) IMU: MPU6000(SPI) OSD: AT7456E Led: Programmable like WS2812 Sensor: Internal Current Sensor (Current Coefficient Amp Meter Scale: 300) Firmware: Betaflight 4.1.2 Flight control model: MTKS/MATEKF411 (STM32F411) Support Frsky/Futaba/Flysky/TBS Crossfire/DSMX | DSM2 Receiver Size: 31.4×31.4mm (25.5mm mounting hole) Weight: 6.83g |
Onboard 20A BLheli_S 4in1 ESC | Continuous Current: 20A Burst Current: 40A Input Voltage: 2-4S Firmware support: BLHELI _ S/JESC Firmware Version: BLHELI _ S(Q_H_20) Motor connector: 1.25mm 3P spacing straight pin holder Protocol Support: PWM,Oneshot125,Oneshot42,Multishot,Dshot150, Dshot300, Dshot600 |
1103 8000KV 3-4S / 11000KV 2-3S Brushless Motor | KV: 8000KV / 11000KV ( Optional) Input Voltage: [email protected]; [email protected] Height: 8.5mm Shaft: φ1.5mm Motor Mount Holes: M2 on Dia 9mm Line length: 40mm Weight: 3.3g |
Runcam Nano 2 700TVL FPV Camera | RunCam Nano 2 700TVL Camera 1.8mm (M8) FOV 170 ° clear camera, videoresolution 700TVL image sensor 1/3 CMOS This camera is relatively high cost performance, the majority of global players, very suitable for novice players. |
5.8G 25/100/200/400mW NANO VTX V1.0 | Brand: SPCMAKER Name: NANO VTX V1.0 Video Formant: NTSC/PAL Power: 25/100/200/400 mw Control Mode: BFOSD Control (RX)/Button Input voltage: 5 v Size: 14 x15mm Pitch: 18 mm Antenna: IPEX Weight: 2 g |
Propeller | GEMFAN 1636 40mm Propeller Quantity: 4 CW & 4 CCW |
Receiver (Optional) | Without Receiver/ Frsky XM+ Receiver/ AC900 Receiver/ Flysky RX-2A Pro Receiver/ DSMX Pro Receiver |
Buzzer | LED Buzzer V1.0 – using manual control and remote control mode, for the novice is more convenient to operate applicable. No need for led lighting during the day -You can choose to manually (no/OFF) in such a state will not turn off the buzzer alarm prompt, this is our product to add personality Design. |
Video Resolution | 1.8mm(M8)FOV170°/700L |
Battery Plug | XT30U-M Plug |
ID:1685769 – SKUF31897