SPT Servo SPT5828W-180 28KG Large Torque Brushless Waterproof Digital Servo for RC Car Robot Airplane Helicopter

$19 $47
SPT Servo SPT5828W-180 28KG Large Torque Brushless Waterproof Digital Servo for RC Car Robot Airplane Helicopter
SPT Servo SPT5828W-180 28KG Large Torque Brushless Waterproof Digital Servo for RC Car Robot Airplane Helicopter
$19 $47

$19 🇺🇸 or €16 🇪🇺

SaveSavedRemoved 0

 

COUPON PRICE: $19 🇺🇸 or €16 🇪🇺

SPT Servo SPT5828W-180 28KG Large Torque Brushless Waterproof Digital Servo for RC Car Robot Airplane Helicopter

*PLEASE NOTE for European Union VAT: Goods purchased with our COUPON and delivered to the destination located in the European Union (EU), VAT and duties (if applicable) have been included in their COUPON prices and there is no need to pay additional taxes.

Also for more:

– SPT Offers see – HERE
– Toys Hobbies and Robot Coupons see – HERE
– 🇪🇺 EU Warehouse Coupons see – HERE
– 🇺🇸 US Warehouse Coupons see – HERE

 

Join Our Telegram Channel

 

Features:

1. The steering gear has slow start function: it is difficult to see with naked eyes that the current of the steering gear is relatively large at the moment of starting or reversing, so the service life of the steering gear is relatively long with this function;

2. Load blocking protection function: when the steering gear is continuously blocked or the angle of load blocking is greater than 3 degrees, the duration is 10 seconds and the current is maintained at 2.5 A or more, the steering gear starts protection. At this time, the locking force is reduced by half. After the load blocking is removed, the steering gear will return to normal when the remote control rotates at will.

3. Voltage and current: the steering gear support voltage is between 4.8v-8.4v, and the BEC is at least 2A or above;

4. Angle range: the default of the remote control is 90 degrees, the maximum is 120 degrees; support the control board 0.5-2.5ms, the angle is 180 degrees;

5. Scope of application: remote control vehicle, climbing vehicle; single chip microcomputer control robot, manipulator, etc;

Upgrade note: this model is currently upgraded to stainless steel gear.

Specification:

Brand:SPT Servo

Potentiometer:Mechanics

Motor:Brushless

Voltage Range:4.8V/6.0V/8.4V

Neutral Point:1500μs

Signal Frequency:330Hz

PWM Voltage:3.3V-5.0V

PWM Voltage:3.3V-5.0V

Feedback Angle:No

Operating Temperature:-10°C-50C

Cycle:20ms

Dead band:2μs

Default Direction:CCW

Yes / no Lock:Lock

Remote control Angle:90

500-2500μs Angle:180* / PWM

Quiescent Current:10mAh

Rated Current:1.4A

Blocking Current:2.5A

Weight / Dimensions:67g / 40.5* 20*37.5mm

Gear Material:All Metal Gear

Shell Material:Half Aluminum Shell

Bearing:2BB

Connector Wire Length:260MM

line Definition:Brown-/Red+/Orange s

Operating Speed:4.8V/ “/60°

                            6.0V/ “/60*

                            8.4V/ “/60°

Stall Torque:4.8V/ kg.cm 

                    6.0V/ kg.cm

                    8.4V/ kg.cm

Package Included:

1xSPT5828W-180 Servo

1xServo Arm Set

 

ID:1827508 – SKUH28063

1827508CN
Logo